Each of our traditional bota wineskins is crafted from flawless goat's hide. Each hide is cured with vegetable oils to make it pliable. Then the skin is cut and sewn by hand to make a tight pleating. Next, it is turned inside out and pitch is applied. Very short bristles of hair are left on the leather to hold the pitch for the inside of each bag. This is heated to create a water proof resin that will last for years. Finally, the bota is sewn together by hand and the final touches are added. There are about 40 stages from the time the skin arrives and the wineskin is finished. This is truly one of the finest botas you can buy.
The pitch lining of the traditional bota has a strong taste of its own. Therefore it is necessary to prepare your traditional bota before using it to hold good wine. First, warm it in the sun so that the pitch within will distribute evenly. Next, blow into the mouth of the bota to inflate it and separate the pitch from its sides-- the more you have warmed the pitch the easier it will be to inflate the bota.
Add cold water and set the bota aside to cure. After 24-36 hours, replace the water with inexpensive wine and let it cure for as long as you can. Discard the wine and your bota will be ready to use.
You only have to do this process once if you are going to keep the wine-skin in continual use. If you are going to set it aside for a while, drain out the contents and leave the cover off. You will need to go though the break in process again when you begin to use the bota later.
This procedure is only necessary for the pitch-lined botas, not those lined with latex. Caring for an authentic bota can be a bother, except for the purist. For most people, the latex lining makes life simpler.
Caring for Your Traditional Spanish Bota
Featured Products
Black Handmade Bota Wineskin - Easy Care Latex Lining
Regular price
$79.00
Sale price
$79.00
Regular price
$0.00
Choose your option
Tan Handmade Bota Wineskin - Easy Care Latex Lining
Regular price
$79.00
Sale price
$79.00
Regular price
$0.00
Choose your option
Choose your option
Tan Traditional Handmade Bota Wineskin
Regular price
$99.00
Sale price
$99.00
Regular price
$0.00
Rated 5.0 out of 5 stars
5.0 Stars (1 Review)



13 Comments
Will the pitch or the wineskinbe ruined if I put veneger in it?
Response:
Vinegar will not hurt the pitch, but a shot of brandy is the preferred way to clean the interior. The high alcohol content prevents any mold or bacteria.
I see a couple questions about mold inside the wine skin. One response from that problem was very warm water. I cant imagin that would kill or disinfect the mold to where it is safe to drink. Am I missing a step? Can I use a little bleach and water? What would be best and safe for the bag?
Response:
The best way to disinfect a traditional bota wineskin is to pour some brandy into it and allow the alcohol to disinfect it. For a bota with a latex interior, hot soap and water will do the trick. I hope this helps!
I’m very excited about my new bota, I’m a the point of having cheap wine in it before pouring my better Spanish wine into it. But, it’s leaking, not from the spout but from the joint above the spout. Any recommendations?
Is it bad to simply leave the bota filled with water all the time? I have been storing mine for about a year now simply filled to the brim and when I dumped the water out just recently I saw no issue with it and filled it up, tasted it and saw no issue with it. Is there some reason that this isn’t a suggestion rather than storing it dry all the time? Or is it because mold can grow in it? I currently have it hanging but should I lay it on its side even when filled so the pitch doesn’t all settle at the bottom or is that only a concern when not filled? I currently have no leaks but did have one when I first broke it in (I got it real real hot and massaged the pitch all around the inside to fill the leaking area and got it to stop) let me know, thanks!
Response:
Hi Eric – For storage the bota maker recommends emptying the bota and adding a shot of brandy or rum to discourage mold growth.
My bota is 3 years old now and I haven’t used it for a year. The black outer has started to crack slightly in a couple of places. Will this cause any leaks. How can I fix this? Thank you.
Response:
Hello,
For quality leather botas, the leather can be rejuvenated using mink oil. Simply spread the mink oil on the leather and gently heat with a hair dryer. The oil should penetrate quite quickly. You may need to repeat a couple of times for the leather to fully recover. Once the leather is in good shape, warm the bota in the sun or with a hair dryer, then massage the bota to evenly distribute the pitch inside of it. Gently blow into the cap to inflate it and then add water. Leave the water in the bota for a day or two and observe to see if there are any leaks.
Best of luck!